DJI FPV Goggle Shims / Wedges

Our 3D prints are designed and printed by 

Noozle3d

, if you want custom colors of our prints you can contact them directly.

Get rid of 95% of the light leak across the top & sides of your

DJI FPV Goggles

with these 3D printed shims designed

Kwboost

. 

Tools needed:

• Razor Blade
• Double-Sided Stick Tape
• Heat gun (optional)

Installation:

1. Remove the foam cushion from the goggles
2. Position the wedge (smooth side down) on the goggles and cut the original Velcro on each end of the shim with a razor blade
3. Gently remove the Velcro from the goggles and reattach them to the rough side of the shim (easily removed with a heat gun and doesn’t lose stick)
4. Mount the smooth side of the shim to the goggle with double-stick tape (not included)
5. Reattach foam cushion

Note:

If you order this item in any color other than black, it may allow for some light leak through the filament.