Avatar HD Kit V2 With 32GB DVR & Gyro For Avatar HD Video System

• Optimized antenna base design and frequency button position for greater convenience
• The only native 4:3 high-definition sensor in the FPV industry
• Updated the design of the PCB board and outer shell
• The spare pad provides two power connection modes
• 2K pixel, 120fps, 4:3 native sensor
• 20*20mm mounting holes
• 1080P 120fps HD FPV
• 160° wide-angle FOV
• F/2.0 Large Aperture
• 32GB built-in storage
• Lightweight design
• GPS anti-jamming
• 22ms low latency
• Ranging Mode
• 4KM range
• 6V-25.2V

• Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; 
• Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
• Min.Illumination: 0.001Lux
• Dimensions: 19*19*22mm
• Gyroflow:  non-supported
• Coaxial Cable: 140mm
• Shutter Rolling shutter
• Ratio: 4:3 native /16:9
• Aperture: F2.0
• Lens: 2.1mm
• Weight: 7.2g
• FOV: 160°

AVATAR V2 VTX

• Transmitter Power (EIRP: FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
• Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss
• 1/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
• Communication Frequency: 5.725-5.850GHz
• Mounting Holes: 25.5*25.5mm; 20*20mm
• Operating Temperature: -20-40℃
• Dimensions: 33.5*33.5*10.5mm
• Latency: Average delay 22ms
• Wide Power Input: 6V-25.2V
• Model: Avatar V2 module
• Recording: 1080p/720p
• OSD: Canvas mode
• Antenna: 1(IPEX)
• Weight: 17.6g
• Storage: 32GB
• Channels: 8

AVATAR V2 ANTENNA

• Frequency range: 5600MHz-6000MHz
• Size: R15 X 45mm(without cable)
• Input Impedance: 50Ω
• Polarization: LHCP
• Interface: IPEX-1
• Gain: 1.9dBi
• VSWR: ≤1.5
• Weight: 2g

• 1x Walksnail Avatar HD VTX V2 – 8GB – No Gyro
• 1x Walksnail Avatar HD Camera V2
• 1x Walksnail Avatar Antenna V2
• 1x USB transfer extension cable
• 4x M2*5*0.5mm gasket
• 1x 4 Pin silicone cable
• 4x M2*14mm screws
• 8x M2*4mm screws
• 4x M2*5mm screws
• 4x M2*6mm screws